Beschreibung
Double Stereo Line Mixer
is a line level professional device for parallel processing, with a fixed mix of 50/50 (dry/wet).
Thought as the ultimate and most compact solution in the business to mix up to two stereo returns with incoming dry signal into a single stereo output.
To avoid any ground loop issue, sends and returns are transformer isolated.
The whole unit can operate at nominal +4db line level signal.
Controls
Left Side
INPUT (mono): this is the main input of the mixer, mono.
OUT LEFT (mono): left output of the system. If only the left output is used (right output is not plugged in) the mixer will sum right and left into this output).
OUT LEFT (stereo): right output of the system. If right output is plugged in, the stereo signal will be preserved as left and right on respective outputs.
Right Side
SEND: this output will split incoming signal from INPUT to other two equal copy. If you use a mono connector, you will have one outgoing signal (on TIP), if you use a stereo connector you will have two equal copies of INPUT signal (first one on TIP, second one on RING).
9VDC: 9 volts negative center power supply connector. Use only high quality power supply with at least clean 100mA supply.
FX1 RETURN: this input will accommodate the mono or stereo return of your first effect. If you’re using a mono effect, a mono cable will work, if you’re using a stereo output from your effect you must use a Y cable to accommodate left and right signal into FX1 RETURN jack.
FX2 RETURN: this input will accommodate the mono or stereo return of your second effect. If you’re using a mono effect, a mono cable will work, if you’re using a stereo output from your effect you must use a Y cable to accommodate left and right signal into FX2 RETURN jack
Manual
